Continuing a legacy of high performance CASE Backhoe Loaders' robust structure, improved fuel efficiency (by 24%), 20% more cabin storage, increase its productivity and efficiency. The S'tyled boom design and spacious cabin provide greater work visibility. These are supported by the best-in-class FPT S8000 Engine. This has upgraded tranmission, that gives it the best-in-class capability to unleash high-performance for all construction functions. Engine & Performance Model: FPT S8000 Power Output: 49.5 HP (37 kW) at 2200 rpm Maximum Torque: 252.2 Nm at 1200 rpm Emission Compliance: BS-III Fuel Efficiency: Up to 24% improvement over previous models Hydraulic System Type: Open Centre Load Sensing Pump: Axial Piston with Electric Displacement Control Flow Rate: 119 lpm System Relief Pressure: 240 Bar Loader Specifications Bucket Capacity: 1.1 m³ Maximum Lifting Capacity: 3425 kg Breakout Force: 5275 kgf (51.73 kN) Dump Height: 2.72 m Load Over Height: 3.30 m Backhoe Specifications Bucket Capacity: 0.26 m³ Maximum Digging Depth: 4.4 m Bucket Rotation: 185 degrees Bucket Digging Force: 5000 kgf (49.03 kN) Transmission & Axles Transmission: 4F-4R Shuttle Synchromesh (CARRARO 2WD TLB1) Front Axle: CNH PS1300 (2WD) Rear Axle: CARRARO 28.32M Dimensions & Weight Operating Weight: 7610 kg Transport Length: 5.88 m Wheelbase: 2.18 m Ground Clearance: 380 mm Operator Comfort & Safety Cabin: Spacious design with 20% more storage Safety Features: ROPS/FOPS certified cabin, 10 audible and 9 visual alerts, anti-theft battery compartment Maintenance: Extended hydraulic oil change interval up to 4000 hours Working Modes: ECO, STANDARD, and POWER modes to balance fuel efficiency and productivity Boom Design: S-shaped boom for better reach and visibility Maintenance Access: Tilt-able front engine hood for easy access to main components
MORE PROFIT PER JOB Thanks to advanced design and engineering, CASE excavators deliver up to 17 percent more horsepower and save an estimated $10,000 per year from lower fuel costs and faster cycle times. Four minimum swing radius models excel at digging and lifting in the tightest work areas. CASE excavators range from 1.7 to 80 metric tons. These excavators are designed for high performance and durability. Whatever your job, CASE has an excavator that is right for you. Performance & Power Engine: FPT F4HE0687A 6-cylinder turbocharged diesel engine Power Output: 117 kW (157 hp) at 1800 rpm Maximum Torque: 622 Nm at 1800 rpm Operating Weight: Approximately 21,600–22,345 kg Bucket Capacity: Ranges from 0.94 to 1.2 m³ Maximum Digging Depth: Between 5.61 to 6.65 meters Travel Speed: Up to 5.6 km/h Swing Speed: 11.5 rpm Hydraulic System Pumps: Two variable displacement axial piston pumps Working Modes: Auto, Heavy, and Super Power modes Features: Auto Power Boost Swing Priority (swing + arm) Pre-set auxiliary pump settings 100% return oil filtration Operator Comfort & Cabin Features Cabin: Pressurized with heat and defrost functions Mechanical suspended seat with adjustable armrest Sliding cockpit and tilting consoles Sunshade and openable roof window Multifunction LCD color monitor 12V electric socket and AM/FM radio with Bluetooth On-board diagnostic system Anti-theft device Undercarriage & Attachments Boom: 5.7 meters Arm Options: 1.9 m, 2.4 m, and 2.94 m Track Shoes: 600 mm, 700 mm, and 800 mm triple grouser steel shoes Additional Features: Sealed and lubricated tracks Toolbox with tool kit Rearview mirrors mounted on cab and toolbox
CASE large DV rollers come standard with a hydraulically adjustable “crab steering” system that can offset the rear drum up to seven inches*. In addition to that, a heavy-duty, roller-style articulation joint allows the machine to oscillate +/-10° to maintain drum-to-ground contact. Together, these features enable superior operation around corners, over bumps or dips, and in confined areas. The front drums of our small DV rollers are positioned about two inches off center from the back drum, allowing for a tighter turning radius, while both drums have a balanced design and a tapered edge to reduce tearing around curves and during transitions. Engine: Mahindra & Mahindra Industrial MDI-2500 Power Output: 45 HP (33.6 kW) at 2000 rpm Maximum Torque: 159 Nm at 1400 rpm Emission Compliance: BS-III Operating Weight: 3225 kg Drum Width: 1250 mm Drum Diameter: 700 mm Static Linear Load: 13.4 kg/cm Centrifugal Force: 42.8 kN Vibration Frequency: 55/65 Hz Amplitude: 0.5 mm Fuel Tank Capacity: 45 liters Water Tank Capacity: 110 liters Hydraulic Tank Capacity: 45 liters Travel Speed: Up to 12 km/h Turning Radius: 3 meters Steering Type: Hydrostatic (Center Point Articulation) Braking System: Service Brake: Hydrostatic Parking Brake: Spring applied, hydraulically released on rear drum Additional Features: High ground clearance for effective operation on uneven surfaces Equal weight distribution for even compaction Weather protection canopy for operator comfort Dual drum scrapers to prevent material buildup Advanced safety features including audible and visual alerts Easy maintenance with accessible components Dimensions Length: 2990 mm Width: 1360 mm Height with Canopy: 2680 mm Wheelbase: 3.0 meters
Engine & Performance Engine: FPT Industrial S8000 Power Output: 99 HP (74 kW) at 2200 rpm Maximum Torque: 400 Nm at 1300 rpm Emission Compliance: BS-III Compaction System Drum Width: 1680 mm Drum Diameter: 1220 mm Vibration Frequency: 33/50 Hz Centrifugal Force: up to 142 kN Amplitude: 0.8/0.4 mm (High/Low) Hydraulic System Type: Closed-loop hydrostatic Drive: Dual drum drive with independent vibration control Operator Comfort & Safety Cabin: ROPS/FOPS certified with ergonomic controls Visibility: 360-degree visibility with adjustable seat Instrumentation: Digital display with real-time monitoring Additional Features Water Spray System: Pressurized with interval timer Lighting: Work lights for night operations Maintenance: Easy access to service points Dimensions & Capacities Operating Weight: 10,000 kg Fuel Tank Capacity: 235 liters Water Tank Capacity: 750 liters
CASE Soil Compactors are complementary to our current road construction machines, such as Graders and Dozers, and they excel in terms of productivity and reliability. Engine: FPT S8000, 4-cylinder, water-cooled, turbocharged with internal EGR Power Output: Up to 110 hp (82 kW) at 2200 rpm Maximum Torque: 458 Nm at 1300 rpm Emission Compliance: Tier III / CEV Stage-V Operating Weight: Approximately 11,100 kg Drum Width: 1,500 mm Centrifugal Force: Up to 274 kN Amplitude: 0.8 mm (low) / 1.8 mm (high) Frequency: 34 Hz Gradeability: Up to 36% with drum drive Fuel Tank Capacity: 275 liters Advanced Vibration System: Equipped with a variable displacement bi-directional axial piston pump, allowing two vibration stages for effective compaction across various soil types. Enhanced Traction: Optional drum drive system with a high-torque drive motor mounted on the front drum frame, providing excellent gradeability and optimized traction. Operator Comfort: Features a 90° rotating seat, ergonomic controls, and a two-post canopy design for improved visibility and reduced operator fatigue. Durability: Incorporates a 4-pin central joint and shock absorbers to minimize vibrations transmitted to machine components, enhancing durability. Maintenance Efficiency: Turbo pre-cleaner ensures only fresh air is delivered to the engine, promoting better combustion and reducing maintenance needs.
CASE Soil Compactors are complementary to our current road construction machines, such as Graders and Dozers, and they excel in terms of productivity and reliability. Advanced Vibration System: Equipped with a variable displacement bi-directional axial piston pump, allowing two vibration stages for effective compaction across various soil types . Enhanced Traction: Optional drum drive system with a high-torque drive motor mounted on the front drum frame, providing excellent gradeability and optimized traction . Operator Comfort: Features a 90° rotating seat, ergonomic controls, and a two-post canopy design for improved visibility and reduced operator fatigue Durability: Incorporates a 4-pin central joint and shock absorbers to minimize vibrations transmitted to machine components, enhancing durability. Maintenance Efficiency: Turbo pre-cleaner ensures only fresh air is delivered to the engine, promoting better combustion and reducing maintenance needs . Telematics Integration: Both models are equipped with CASE Site Watch™ telematics for real-time monitoring, fleet management, and preventive maintenance .
EARTHMOVING PERFORMANCE CASE motor graders are built with a powerful engine, rugged A-frame and moldboard design, industry-leading flip-up rear hood, best-in-class serviceability and outstanding visibility. They’ll make you more productive on the toughest jobs and longest days. Adjustable Moldboard: Enables a wide range of positions for fine grading. High Moldboard Clearance: Improves debris management and cutting capability. Spacious Cab: With excellent visibility and climate control for all-weather use. Air-Suspension Seat: Reduces operator fatigue during long hours. Low Noise and Vibration: For a smoother operating experience. Box-Frame Construction: Ensures long-lasting structural integrity. Easy Service Access: Simplifies routine maintenance with grouped service points. AccuGrade™ and Other Grade Control Systems: Available for enhanced grading accuracy. Telematics (CASE SiteWatch): Monitors machine usage, health, and location remotely. Multiple Attachments Available: Like rippers, scarifiers, and snow wings. Hydraulic Quick Coupler: Available on some models for faster attachment changes.
TORQUE CONVERTER LOCK-UP The machine drives faster with no extra torque The lock-up system overrides the torque converter operation in machines featuring the B-Series' type of engine and transmission coupling. When it is activated, the lock turns the hydraulic coupling into a direct (rigid) coupling. The Lock-up system is automatically activated according to operating conditions, when the transmission electronics unit's torque and engine speed readings reach preset values. The Lock-up is usually activated in travel applications where no extra torque is required from the torque converter and the machine runs at a higher speed.
Crawler Dozers PUSHING THE LIMITS CASE crawler dozers deliver best-in-class powertrain technology for superior track power and outstanding blade force through the turns. CASE dozers power both tracks when turning to increase material retention and productivity. An ultra-comfortable operator platform with intuitive controls and great visibility further boosts productivity and operator comfort. Electro-Hydraulic Controls: Precise and customizable blade movement with low-effort joystick operation. Adjustable Steering Sensitivity & Shuttle Settings: Operators can tailor responsiveness to suit their comfort or job requirements. Grade Control Ready: Compatible with 2D and 3D systems like Trimble or Leica for high-precision grading. Heavy-Duty Undercarriage: Designed for maximum ground contact, stability, and wear life. Sealed & Lubricated Track (SALT) Chains: Minimize maintenance and extend undercarriage life. Tool-Free Service Access: Swing-out cooling packages, grouped service points, and easy-to-access engine compartments. Spacious, Pressurized Cab: Reduces noise and dust while offering all-around visibility. Air-Ride Seat with Heat/Optional Ventilation: Enhances comfort during long shifts. Ergonomic Layout: Controls are within easy reach, with an intuitive 8-inch LCD display on some models. CASE SiteWatch™ Telematics: Monitor machine health, location, and usage remotely. Auto Idle & Auto Shutdown: Helps save fuel and reduce engine wear during downtime
M-Series Crawler Dozers PUSHING THE LIMITS CASE crawler dozers deliver best-in-class powertrain technology for superior track power and outstanding blade force through the turns. CASE dozers power both tracks when turning to increase material retention and productivity. An ultra-comfortable operator platform with intuitive controls and great visibility further boosts productivity and operator comfort. Cab: Fully enclosed ROPS cab with positive-pressure sealing to reduce dust and noise Seat: Cloth air suspension seat with back adjustment Controls: Single-lever control for speed, steering, and direction; adjustable shuttle, steering, and blade sensitivity settings Visibility: Low-sloping hood and floor-to-ceiling glass doors for enhanced visibility Additional Features: Blade-shake button for cleaning, fine grading mode for precision work Design: Heavy-duty panels with pressure-closing latches for quick access to key service points Cooling System: V-shaped cooling system with auto-reversing fan to clear debris and maintain optimal temperatures Telematics: CASE Site Watch™ for remote monitoring of machine health, location, and usage Operating Weight: Approximately 45,651 lbs (20,707 kg) Overall Length: Approximately 7.366 m Overall Width: Approximately 3.556 m Overall Height: Approximately 3.15 m
Hydraulic Rock Breaker Noise and vibration dampening as standard Large tool diameter for optimum transfer of the high blow frequency Different tools available for increased versatility Avaiable in 3 variants CB230, CB61 & CB62. Carrier Compatibility: Designed to be mounted on excavators, skid steers, backhoes, and compact loaders. Quick Coupler Ready: Many models allow for fast attachment changes without tools. Mounting Brackets: Customized to match specific carriers and working environments. Monoblock or Box-Type Design: Reduces parts and increases strength. High-Strength Steel Housing: Protects internal components from impact and environmental wear. Nitrogen-Charged Backhead: Enhances striking power and cushions shock. Multiple Tool Types: Chisel, moil, blunt, pyramid, and spade tools for different tasks. Easy Tool Replacement: Quick-change systems to minimize downtime. Internal Vibration Dampening: Minimizes stress on carrier and operator fatigue. Automatic Greasing Systems: Extend tool life and reduce maintenance needs. Pressure and Flow Control: Ensures optimal breaker function regardless of carrier size. Soundproofed Box Housing: Reduces noise for urban or sensitive environments. Anti-Vibration Handles and Mounts: Improves operator comfort and protects the carrier. Auto Shut-off Systems: Prevent blank firing (when the hammer fires without resistance). Break Time Tracking: Monitors operating hours and blow count for maintenance planning. Telematics-Ready: Some are compatible with systems like CAT Product Link or Komatsu Komtrax. Trenching and Foundation Work Primary Rock Breaking in Quarries Demolition of Concrete Structures Road and Pavement Breaking Mining and Tunnel Excavation
